Read more
How to Flash Tecno Spark 20 Pro Plus: A Complete Step-by-Step Guide. ROM Tecno Spark 20 Pro Plus KJ7 | [Official].
If you're experiencing issues with your Tecno Spark 20 Pro Plus such as software bugs, lagging, or even boot loops, flashing your device can help restore it to its original state. Flashing can fix many problems by reinstalling the firmware. In this guide, we’ll explain how to flash the Tecno Spark 20 Pro Plus safely and effectively.
What Does Flashing a Phone Mean?
Flashing is the process of installing new firmware on your device. This process can either update or reinstall the operating system. It is commonly used to:
Fix software issues.
Remove malware.
Restore factory settings.
Upgrade to the latest Android version.
Before you proceed, make sure to follow all the instructions carefully to avoid bricking your device.
Things You Need Before Flashing
To flash your Tecno Spark 20 Pro Plus, you'll need the following tools and resources:
- 1. Original USB Cable – To connect your phone to the computer.
- 2. Tecno Spark 20 Pro Plus Firmware/Flash File – You can download it from trusted sources like FlashFile.pro.
- 3. SP Flash Tool – A flashing tool compatible with Tecno devices.
- 4. MTK USB Drivers – Ensure your PC can detect your phone during the flashing process
- 5. Backup of Important Data – Flashing will erase all data on your phone.
How to Flash Tecno Spark 20 Pro Plus: Step-by-Step Guide
Step 1: Download and Install Required Files
- Download the latest Tecno Spark 20 Pro Plus flash file from a reliable source.
- Install the MTK USB Drivers on your computer.
- Step 2: Extract the Firmware and Flash Tool
- Extract the downloaded firmware and SP Flash Tool files using tools like WinRAR or 7-Zip.
- Step 3: Open the SP Flash Tool
- Launch the SP Flash Tool on your PC.
- Click on the Scatter-loading button and locate the scatter file from the firmware folder.
- Step 4: Power Off Your Phone
- Turn off your Tecno Spark 20 Pro Plus and remove the battery if it is removable.
- Step 5: Connect Your Phone to the PC
Use the USB cable to connect your phone to the computer. The SP Flash Tool will automatically detect your device.
Step 6: Start Flashing
In the SP Flash Tool, click on the Download button to begin the flashing process.
Wait for the process to complete. You’ll see a green checkmark when it’s done.
Step 7: Reboot Your Phone
Disconnect your device and power it on. The first boot may take longer than usual.
Precautions While Flashing Your Tecno Spark 20 Pro Plus
Always download firmware specific to your device model to prevent bricking.
Ensure your phone has at least 50% battery life before starting the flashing process
Do not disconnect the device while flashing.
Troubleshooting Common Issues
1. Phone Not Detected by SP Flash Tool
Reinstall the MTK USB drivers and restart your computer.
2. Flashing Stuck at a Certain Percentage
Check the USB connection and try a different cable or port.
3. Device Boot Loop After Flashing
Perform a factory reset by entering Recovery Mode.
Conclusion
Flashing your Tecno Spark 20 Pro Plus is a simple yet powerful solution to fix most software issues. By following this step-by-step guide, you can safely restore your phone to optimal performance.
For more guides and trusted flash files, visit FlashFile.pr
o, your ultimate resource for firmware solutions.
Disclaimer: Flashing your phone involves risks. Proceed at your own discretion.